Edelbrock Performer 400 Intake Manifold is Designed for Ford 351/400 Modified Engines, 1971-82 400 c.i.d. w/ 2V Cleveland Heads & 1975-82 351-M V8's. Will not fit 1974 & earlier 351-C V8s. Accepts 4150-Style Square-Bore Carb. Non-EGR
Edelbrock part #2171 Performer 351M/400M intake manifold is designed for 400 c.i.d. Ford V8's produced from 1971 to 1982 with 2V Cleveland heads and 351M V8's produced from 1975 to 1982. Will not fit 1974 and earlier 351C V8's. Valley width measures 8-17/32". Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Application Summary:
| Year |
Make/Model |
| 1978-1981 |
Ford Bronco |
| 1971-1974 |
Ford Country Sedan |
| 1971-1974 |
Ford Country Squire |
| 1971-1972 |
Ford Custom |
| 1971-1977 |
Ford Custom 500 |
| 1980-1981 |
Ford E-250 Econoline |
| 1980-1982 |
Ford E-250 Econoline Club Wagon |
| 1980-1982 |
Ford E-350 Econoline |
| 1980-1982 |
Ford E-350 Econoline Club Wagon |
| 1975-1976 |
Ford Elite |
| 1977-1979 |
Ford F-100 |
| 1977-1981 |
Ford F-150 |
| 1977-1982 |
Ford F-250 |
| 1977-1982 |
Ford F-350 |
| 1971-1974 |
Ford Galaxie 500 |
| 1972-1976 |
Ford Gran Torino |
| 1971-1978 |
Ford LTD |
| 1977-1979 |
Ford LTD II |
| 1971-1974 |
Ford Ranch Wagon |
| 1972-1979 |
Ford Ranchero |
| 1972 |
Ford Thunderbird |
| 1977-1979 |
Ford Thunderbird |
| 1972-1976 |
Ford Torino |
| 1977-1979 |
Lincoln Continental |
| 1977-1979 |
Lincoln Mark V |
| 1971-1974 |
Mercury Colony Park |
| 1973-1979 |
Mercury Cougar |
| 1975-1978 |
Mercury Grand Marquis |
| 1971-1978 |
Mercury Marquis |
| 1972-1976 |
Mercury Montego |
| 1971-1974 |
Mercury Monterey |
| Attributes |
| ASIN |
B000CN8XHM |
| Basic Operating RPM Range |
Idle-5500 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Center Maximum Height |
4.170, 4.170, 4.17 |
| CNC Ported |
No, No, No |
| Country of Origin (Primary) |
US |
| Cylinder Head Type |
Standard |
| EGR Port |
No |
| Emission |
Without EGR |
| Emission Code |
Not in CA |
| Engine Make/Size |
Ford 351M-400 |
| Finish |
Satin, Satin, Satin |
| Flange Type |
4150 |
| Front Maximum Height |
3.600, 3.6 |
| Gasket Or Seal Included |
No, No, No |
| Grade Type |
Performance, Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708998175 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminum, Aluminum, Aluminum |
| NAFTA Preference Criterion Code |
B |
| Number of Carbs |
One |
| Position |
N/A |
| Potential Risk Chemical |
Lead |
| Rear Maximum Height |
4.750, 4.75 |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov., WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range |
Idle -5500 |
| SDR Required Flag |
N |
| SDS Sheet Number |
NA |
| Series |
Performer, Performer |
| Single Or Dual Plane Type |
Dual Plane, Dual Plane, Dual |
| Usage |
Street/Hi-Performance |
| Vehicle Model |
Ford, Ford |
| Warranty Time |
12 |
| GTIN |
00085347021710 |
